词语屋>英语词典>air hole翻译和用法

air hole

英 [eə(r) həʊl]

美 [er hoʊl]

通气孔

机械

英英释义

noun

  • a hole that allows the passage of air
    1. a local region of low pressure or descending air that causes a plane to lose height suddenly
        Synonym:air pocketpocket

      双语例句

      • The results show that regulation of air hole diameter and the cladding air hole pitch size, change the media filling ratio, can effectively control the photonic crystal fibers.
        结果证明,调节空气孔直径和包层空气孔间距的大小,改变介质的填充比,可以有效地控制光子晶体光纤的色散。
      • The air hole of the oil box's top can not jam by the sundries or dirty thing.
        油箱顶部加油口盖有一空气呼吸孔不能被杂件堵塞。
      • Open the air hole; the fire is dying down.
        把气孔打开,火要熄了。
      • It is not necessary to set air hole at the inverted siphon tube mouth and also no need to have the top of the tube entrance lower than the water level of the minimum for the tube.
        倒虹吸管进口不需要设置通气孔,也没必要使倒虹吸进口顶缘低于倒虹吸管通过最小流量时进水口前的水位。
      • The defects of welding of pure aluminum are air hole, un interfuse, occlude and holding wolframium, etc.
        纯铝在焊接过程中存在的主要缺陷是气孔、未熔合、夹杂及夹钨等。
      • A plurality of transverse baffles are positioned in the cylinder, on which an air hole, a weir and a tube for catalyst flow are positioned and on top or bottom of which a vapor inlet is positioned.
        筒体内设有横向隔板,隔板上设有通气孔、堰和降剂管,隔板上面或者下面设有蒸汽进口。
      • The utility model comprises a jar body, a jar lid, an air hole, a cushion ring, internal screw threads and external screw threads.
        本实用新型由坛体、坛盖、透气孔、垫圈、内螺纹和外螺纹构成。
      • This thesis describes this technique in detail, and studies anamorphic core-shape PCF and mode converters based on controlled air hole collapse theoretically and experimentally.
        本文对PCF的选择性空气孔塌缩技术进行了详细地介绍,并对应用该技术制成的纤芯变形PCF和模式转化器进行了理论分析,以及相应的数值模拟和实验研究。
      • One important result is that the non-intentional birefringence depends on the mean air hole diameter, and a increase of the size of the fiber structure the birefringence.
        结果表明,由孔径分布不规则所产生的双折射的大小主要取决于空气孔直径的平均值。
      • Some technical research of EBW are carried out in allusion to the air hole of weld and descend of toughness in the welding of material of.
        针对工业纯钛在焊接过程中易形成气孔并发生塑性下降等问题,采用真空电子束焊进行焊接工艺研究。